nXLi Dry Pump
nXLi Dry Pump
Two pumping speeds. Hermetically Sealed, innovative mechanism
Superior vacuum levels achieved
transient overload protection
Smooth, low noise and vibration operation
Hermetically Sealed, innovative mechanism
Superior vacuum levels achieved
Integral controller and safety systems for flexible operation
Smooth, low noise and vibration operation
Oil lubricated precision bearings with no routine maintenance
iXL Sizes
iXL120N
iXL1000N
Peak Pumping Speed m³/h
110
930
Ultimate Pressure mbar
0.013
0.001
Power at Ultimate kW
0.55
1
Power in Green Mode kW
0.05
0.045
Noise at Ultimate dB(A)
<55
<55
nXLi Sizes
nXL110i
nXL200i
Peak Pumping Speed
m³/h
110
200
Ultimate Pressure
mbar
<0.02
<0.02
Power at Ultimate
kW
0.65
0.65
Power at typical (2-10mbar)
kW
0.7 - 0.9
0.7 - 0.9
Noise at Ultimate
dB(A)
56.7
56.7
iXL Sizes
iXL120N
iXL1000N
Peak Pumping Speed
m³/h
110
930
Ultimate Pressure
mbar
0.013
0.001
Power at Ultimate
kW
0.55
1
Power in Green Mode
kW
0.045
0.05
Noise at Ultimate
dB(A)
<55
<55
nXLi provides a small footprint with quiet operation making it a convenient and flexible high performing, yet compact, vacuum pump. The oil-free non-contacting pump mechanism will provide extended operation with maximum up time, up to five years service life, with zero maintenance and no oil to dispose of.
During the initial chamber pump down the nXLi is able to work harder than normal. The intelligent transient overload protection will allow a higher power draw for a short period of time for initial evacuation of the chamber from atmospheric pressure to operating pressure. This higher initial power boost enables the pump to overcome initial gas loads and once operating pressure is achieved less power is required.
nXLi is the latest addition to the Edwards intelligent pumping range and is the ideal dry pump for Scientific OEMs, LCMS end users, ICPMS end users and in applications where a consistent performance, control and reliability are essential.
Product Features
UNIQUE PERFORMANCE
Class leading chamber pump down time reduces total average cycle time (TACT)
LOW POWER
Only 0.55kW* power consuption helps minimise customers cost of ownership
SMOOTH RUNNING
Oil lubricated precision bearings ensure smooth, low vibration operation with no routine maintenance
COMPACT
iXL120 is extremely small and light, saving valuable space
GREEN MODE
Green Mode can reduce power consumption by up to 92% during idle periods
ZERO PURGE OPTION
Zero nitrogen purge option eliminates the need for a nitrogen supply, saving installation and operating costs
Product Features
ENHANCED EMC VARIANT
High volt variant to meet the EU harmonic emissions requirement
INTELLIGENT DRIVE
Enables the system to achieve the enhanced performance plateau from single phase power supply, whilst looking after the pump during initial pump down
FLEXIBILITY OF CONTROL
Manual and simple remote control and serial communications (RS485 with Modbus command set).
COMPACT AND QUITE
Small footprint and quiet operation for an improved work environment and better use of lab space
OIL FREE
and maintenance free ensures extended operation and maximum up time. Built-in exhaust valve for anti-suckback protection
PROVEN RELIABILITY
Based on Edwards iXL technology for peace of mind with a proven track record of performance