We supply a wide range of vacuum measurement instrumentation for R&D as well as industrial applications. All our gauges are specialised for vacuum measurement - pressures below atmospheric pressure - and provide accurate, reliable and repeatable absolute pressure readings so that you can focus on your experiment or process.
Pressure range
Gas independent
Bakeable
Phisical Principle
Flange
Temperature range Operating
Temperature range Storage
Variants
mbar
ºC
ºC
APG
Atm to 10⁻⁴
No
Yes*
Pirani
NW16/ CF16 / NW25
5 to 60
-30 to 70
Electrical/digital/fieldbus
APGX-H
1333 to 3x10⁻⁴
No
Yes*
Pirani
NW16 / NW25 / 1/8NPT
5 to 60
-30 to 70
Electrical
P3
1200 to 5x10⁻⁴
No
No
Piezo - Pirani
NW16
5 to 50
20 to 60
Electrical / Digital
ASG2
2000 to 1
Yes
No**
Diaphragm
NW16 / 1/8 NPT
-40 to +80
-40 to +80
Electrical
ATC
65 to 1.3 x10⁻³
Yes
No
Thermocouple
1/8" NPT
6 to 300
cool dry place
Electrical
AIM
10⁻² to 10⁻⁹
No
No
Inverted magnetron
NW25
5 to 60
0 to 70
Electrical/digital/fieldbus
WRG
Atm to 10⁻⁹
No
No
Invt. magnetron-pirani
NW25 / CF40
5 to 60
0 to 70
Electrical /Digital
WRH
1000 - 5x10⁻¹⁰
indirect dependent
_
Pirani - Bayard Alpert
NW25 / NW40 / DN40CF
5 to 60
40 to 65
Electrical
AIGX
6.6x10⁻² - 10⁻¹⁰
No
Yes***
Ion
NW25 / NW16 / CF40
0 to 40
-30 to 70
Electrical
* Bake-out with electronics removed ** Do not exceed the storage temperture conditions *** 200⁰C with electronics removed
Pressure range
Gas independent
Bakeable
Flange
Temperature range
Phisical Principle
mbar
ºC
CG16K
0-1040
Yes
No
NW16
10 to 50
CG16K
0-125
Yes
No
NW16
10 to 50
CG16K
0-50
Yes
No
NW16
10 to 50
CG16K
0-25
Yes
No
NW16
10 to 50
Barometrically Compensated Capsule Dial Gauge
Pressure range
Gas independent
Bakeable
Flange
Temperature range operating
Temperature range storage
Variants
Phisical Principle
mbar
ºC
ºC
Barocel7025
1000 / 100 / 10 / 1 / 0.1
Yes
Yes *
NW16 / 8VCR
10 to 40
-40 to 65
Digital (D-Sub 15 pin)
capacitance diaphragm gauge
Barocel7025M
1000 / 100 / 10
Yes
Yes *
NW16 / 8VCR
10 to 40
-40 to 65
Digital (D-Sub 15 pin)
capacitance diaphragm gauge
Barocel7045
1000 / 100 / 10 / 1 / 0.1
Yes
Yes *
NW16 / 8VCR
10 to 40
-40 to 65
Digital (D-Sub 15 pin)
heated capacitance diaphragm gauge (45⁰C)
Barocel7100
1000 / 100 / 10 / 1 / 0.1
Yes
Yes *
NW16 / 8VCR
10 to 40
-40 to 65
Digital (D-Sub 15 pin)
heated capacitance diaphragm gauge (45⁰C)
* < 110⁰C at the flange
Pressure range
Gas independent
Bakeable
Flange
Temperature range operating
Temperature range storage
Variants
Phisical Principle
mbar
ºC
ºC
PRG20K
1000 - 5x10⁻⁴
No
No
NW16 / CF16
0 to 40
-20 to 60
Electrical
thermal conductivity technology
according to Pirani
CPG35K
10⁻² to 10⁻⁹
No
Yes (CPG35KB only)
NW40 / CF40
0 to 80
-25 to 80
Electrical
cold cathode ionization technology according to Penning
IG40 BA
10⁻² to 10⁻¹¹
Yes *
CF40
20 to 80
-20 to 60
Electrical
Bayard Alpert
IG40 EX
10⁻⁴ to 10⁻¹²
Yes
CF40
20 to 80
-20 to 60
Electrical
Extractor
*Bakeable (up to 200 °C) gauge head cables to IG
Electrical Supply
Power consumption
Maximum operating altitude
Ambient operating temperature range
Channels
Interface
Gauge compatibility
Display
m
ºC
ADC Standard
100 to 240 V a.c. 47 to 63 Hz
15 W maximum
2000
0 to 40
1
Analog
APG100-XM, APG100-XLC, APG-L, APG-M, APG-MP, APGX-H, APGX-L, APGX-M, APGX-MP and WRG
High brightness green LED 7-segment display LED enunciators for units and display mode
ADC Enhanced
100 to 240 V a.c. 47 to 63 Hz
15 W maximum
2000
0 to 40
2
RS232
APG100-XM, APG100-XLC, APG-L, APG-M, APG-MP, APGX-H, APGX-L, APGX-M, APGX-MP , WRG, AIM-S, AIM-X and ASG
High brightness green LED 7-segment display LED enunciators for units and display mode
TIC
90 to 264 V a.c. 47 to 63 Hz
55 VA max
3000
0 to 40
3
RS232/485
APG100-XM, APG100-XLC, APG-L, APG-M, APG-MP, APGX-H, APGX-L, APGX-M, APGX-MP , WRG, AIM-S, AIM-X, ASG and AIGX**
High brightness green LED; option to 1, 3 or 6 channels simultaneously; assigns a four character alphanumeric name for each gauge; units in mbar, Torr, Pa or Volts
TIC
90 to 264 V a.c. 47 to 63 Hz
160 VA max
3000
0 to 40
6
RS232/485
APG100-XM, APG100-XLC, APG-L, APG-M, APG-MP, APGX-H, APGX-L, APGX-M, APGX-MP , WRG, AIM-S, AIM-X, ASG and AIGX**
High brightness green LED; option to 1, 3 or 6 channels simultaneously; assigns a four character alphanumeric name for each gauge; units in mbar, Torr, Pa or Volts
TIC (Capman)*
90 to 264 V a.c. 47 to 63 Hz
160 VA max
3000
0 to 40
6
RS232/485
Up to 6 active gauges including: APG, APGX, ATC, ASG, AIM, WRG, AIGX and Capacitance Manometers 7025, 7025M, 7045 and 7100
High brightness green LED; option to 1, 3 or 6 channels simultaneously; assigns a four character alphanumeric name for each gauge; units in mbar, Torr, Pa or Volts
* must include D40003050 adaptor for each Barocel ** up to 3 but only 1 in degas
Electrical Supply
Power consumption
Maximum operating altitude
Ambient operating temperature range
Channels
Interface
Gauge compatibility
Display
W
m
ºC
PGC201
100 - 240 V a.c.
< 10
2000
5 to 50
3
RS232/485
1 or 2x PRG and just 1x CPG
digital, 7 segment LED, 4 digit mantissa and 2 digit exponent
PGC202
100 - 240 V a.c.
< 60
2000
5 to 50
3
RS232/485
1 or 2x PRG and just 1x IG
digital, 7 segment LED, 4 digit mantissa and 2 digit exponent
We provide high-accuracy analogue pressure gauges that are designed specifically for vacuum.
Depending on your vacuum level, there are specific models that can provide you with better resolution in a specific range of interest: 0-1000 mbara; 0-120 mbara; 0-50 mbara; 0-25 mbara.
These analogue gauges provide always-on pressure reading - they don't use without electronics, batteries or electrical supply - and can be used as a quick reference for many vacuum applications above 1 mbar.
Digital vacuum gauges are necessary when a digital display or output signal is required and/or when pressures below 1 mbara or even 10 mbara are required, none of which analogue gauges can provide.
There are many types of digital vacuum gauges, and the selection depends on factors such as what is the application; what is pressure range and what accuracy/resolution is required. Digital active gauges have on-board electronics for output signals and communication.
Passive digital vacuum gauges are used in special applications where the installation environment or the technical specification requires that the gauge head does not include any electronics. For example, in installations where the gauge is exposed to radiation that would affect any on-board electronics.
Barocel capacitance manometers are built for superior vacuum measurement performance. They provide high pressure accuracy, stability, repeatability, and a direct measurement of overall total pressure, independent of the gas mixture being used.
Each gauge provides high accuracy over 3 decades and are maintenance-free, with heatable and corrosion resistant versions available.
The Active Digital Controller (ADC) is a compact single gauge controller and display. It automatically recognises compatible Edwards gauges: APG100, APGXH and WRG.
The Active Digital Controller (ADC) is a compact dual gauge controller and display. It automatically recognises compatible Edwards gauges: APG100, APGXH, WRG, and AIM.
It can control two gauges of the same type and has RS232 interface and analog output, and two set-point relays.
The TIC instrument controller offers control and display of up to 6 compatible Edwards gauges (APG100, APGXH, WRG, AIM, AIGX and Barocel) It features an RS232 and analog output, six set-point relays and full Windows software for control and data logging functionality.
The unit may be either rack or bench mounted and provides a useful
hub for the flexible operation of a wide range of vacuum system
configurations, and can be integrated into your wider netowrk using the LABVIEW driver.
The PGC 201 and PGC202 passive gauge controllers are compact 3-channel operating units for a pressure range for passive sensors.
They incofeature automatic switch-over, adjustable relay switching, cable lengths of up to 50m and many other
The following Chart shows most of our gauges . Click on their picture to know more about them:
mbara
mbara
* Approximate values, not to scale. Refer to individual pump specifications prior to selection.
We understand that vacuum is unique and different for each process. We can provide you support from product repair to custom service solutions.
Our specialized team wil study each case to increase the lifetime of your sytems. They can even apply the principles of Industry 4.0 and the Internet of things to reduce the cost of your vacuum system.
Iberica Vacuum is specialized in the supply of equipment and services for the Vacuum, Abatement and Leak Detection sectors in Spain and Portugal. Founded in Madrid in 2007, the company has been the official distributor for Edwards, leading global vacuum equipment supplier, and Gamma Vacuumfor 14 years.
On April 2021,Iberica Vacuum joined Edwards, part of Atlas Copco group, following an acquisition process.Iberica Vacuum continues to operateand keeps its legal entitywhile fully integratedwithEdwards.
Our Goal is to provide world-class support, products and service to our customers in the Iberian Market, and support and contribute in the transformation of associated research and production sectors, both in the development and application of technology as well as in the relationships between our team, customers, collaborators and environment.
