Subminiature D Type HV Ribbon Cables – Connector to Cable

Nº Contacts
Connector Type

Subminiature D Type HV Ribbon Cables – Connector to Cable

HV Cable Assemblies

Connector to cable HV ribbon cable assemblies are fitted with stainless steel / DAP2 subminiature D connectors at one end and non terminated, Teflon® insulated ribbon cable at the other. These components are suitable for vacuum applications down to 1 x 10-8 Torr with a maximum temperature of 125°C. The female cable connectors mate directly onto the vacuum side of subminiature D feedthroughs  or with the male in-vacuum cable connectors. The ribbon cable jacket is an  extruded FEP Teflon®, the conductor is 28AWG silver plated copper, stranded 7 x 0.127mm.

Contact to cable UHV ribbon cables do not include connectors.

• 7 x 0.127mm (28AWG) wire ribbon cable.
• HV compatible.
• Custom lengths available.

Voltage  :  Signal
Current  :  Signal
        Conductors  :  Silver plated copper.
        Insulation  :  FEP Teflon®
        In-vacuum connector2  :  Stainless steel / DAP
Temperature Range1  :  -75°C to 250°C
1 – Assembly rating is reduced to that of the lowest rated component.
2 – DAP is a glass filled dyiathilate.