Q9R2S500-E

Subminiature D Type UHV Ribbon Cables – Female to Female Extension Cable

UHV Cable Assemblies

Female connector to Female connector UHV ribbon extension cables are fitted with PEEK subminiature D Female connectors at both ends of the Kapton^® insulated ribbon cable. The female cable connectors mate directly onto the vacuum side of subminiature D feedthroughs or with the male in-vacuum cable connectors. The ribbon cable is made with Kapton^® insulated 28AWG silver plated copper conductors, stranded 7 x 0.127mm. The cables are woven with a PEEK monofilament with a nominal diameter of 0.2mm.

Features:
• 7 x 0.127mm (28AWG) wires woven into a ribbon cable.
• PEEK monofilament weave.
• UHV compatible.
• Custom lengths available.

Specifications:
Voltage : Signal
Current : Signal
Material
        Conductors : Silver plated copper.
        Insulation : Type F Kapton^® film
        Braid / weave : PEEK
        In-vacuum connector² : PEEK
Temperature Range¹ : -75°C to 250°C
Kapton^® Properties
        Dielectric constant : 2.9
        Dielectric strength : 80kV/mm
        Dissipation factor, 1MHz : 0.002
        Initial tear : 13.4kg/mm
        Elongation : 50%
        Moisture absorbtion : 0.4% @ 50% RH
        Radiation resistance : 10⁹ Rads

______________________________________
¹ – Assembly rating is reduced to that of the lowest rated component.
² – PEEK is a polyetheretherketone thermoplastic.

Collections: Hardware

Type: Feedthroughs