Subminiature 9 Pin C Type Cables

Size L
Cable Type
Connector Type

In Vacuum Subminiature 9 Pin C Type Cables

UHV Cable Assemblies
In-vacuum cables for C type feedthroughs are available in two configurations: Round cable assemblies consisting of 9 wires bound with PEEK braid into a round bundle and fitted with PEEK C connector, or ribbon cable assemblies consisting of 9 wires woven into a flat ribbon using a PEEK weave thread and fitted with PEEK connector. Both types are  supplied as standard with connector fitted one end and the opposite end being non terminated. Round cables are colour coded for ease of identification.
Both round and ribbon cables are also available fitted with female crimp connectors (without PEEK housing) one  end with the opposite end not terminated. These cables will not allow subsequent fitting of connector as wire  must be threaded through connector back prior to crimping contacts.
Extension cables, with female PEEK connector fitted both ends are also available in both round and ribbon type cables.

• 9 wire, 7 x 0.127mm (28AWG) configuration, either round or ribbon.
• PEEK braid outer or weave.
• UHV compatible.
• Custom lengths available.

Voltage1  :  600VAC, 2kVDC max
Current1  :  2A
        Conductors  :  Silver plated copper.
        Insulation  :  Type F Kapton® film
        Braid / weave  :  PEEK
        In-vacuum connector3  :  PEEK
Temperature Range2  :  -75°C to 250°C
Kapton® Properties
        Dielectric constant  :  2.9
        Dielectric strength  :  80kV/mm
        Dissipation factor, 1MHz  :  0.002
        Initial tear  :  13.4kg/mm
        Elongation  :  50%
        Moisture absorbtion :  0.4% @ 50% RH
        Radiation resistance :  109 Rads