mXDS3
mXDS3
Edwards range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s.
The new mXDS3 dry scroll pump delivers 3m3/h pumping speed together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. mXDS3 is the standard option supplied with no inlet valve fitted.
mXDS3s comes factory fitted with an inlet valve featuring delay opening. It is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control.
This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements.
Velocidades de bombeo
3 m3/h
Presión final
1x10-1 mbar
nXDS
Edwards nXDS La bomba seca Scrollproporciona excelentes niveles de vacío, capacidad de bombeo de vapor, al mismo tiempo que es silenciosa y ofrece intervalos de mantenimiento ultra bajos que incluso el cliente puede llevar a cabo. En general, proporciona un rendimiento y una fiabilidad superiores junto con unos costes de funcionamiento y mantenimiento muy bajos. La nXDS es una inversión inteligente a medio y largo plazo para cualquier cliente en términos de costos.
Velocidades de bombeo
6, 10, 15, 20 m3/h
Presión final
0.007 mbar
Versiones especiales
Química, Atex, Recirculación de gases
Silenciosa
With only 54 dB(A) and very low vibration levels, it is the ideal laboratory primary pump.
Rendimiento
Con niveles de vacío únicos ahora comparables a los de las bombas de paletas rotativas de aceite.
Totalmente Seca
no oil to check,
pump environmentally friendly.
Bajo Mantenimiento
tip seal change when required (typically 2 years)
Compacta
With under 8 kg and a size of just 158x224x231mm.
Inteligente y Conectada
IEC connector for power and local on/off switch enables easy connection and simple control.
Silenciosa
El nXDStiene niveles muy bajos de ruido y vibración como estándar.
Rendimiento
Esta bomba seca Scrollalcanza niveles de vacío únicos.
Totalmente Seca
El nXDS utiliza un mecanismo de aislamiento de fuelle patentado que lo hace totalmente seco.
Bajo Mantenimiento
La junta de la punta se cambia a partir de los 2,5 años en funcionamiento 24/7, y los rodamientos se cambian cada 5 años.
Gestión de vapor
Su gas ballastcapacidad permite bombear los vapores evitando la condensación interna.
Inteligente
Reinicio automático, modo de espera, control de velocidad, operación remota y alertas de mantenimiento...
Datos Técnicos
Ultimate pressure with closed gas ballast
Max pumping speed
Power consumption at ultimate
Leak tightness
Conexión de entrada
mbar
m3/h
W
mbar/ls-1
mXDS3
0.1
3
180
1x10-4
DN 16 ISO-KF
mXDS3s
0.1
3
210
1x10-4
DN 16 ISO-KF
The Edwards smXDS3weighs just under 8kg and occupies minimal footprint saving valuable space in your environment.
When looking for excellent dry pumping performance in a compact lightweight package the mXDS3 is sure to deliver. A pumping speed of 3 m3/h and good ultimate vacuum 0.1 mbar makes these pumps well suited for backing turbomolecular pumps. They are supplied with a gas ballast facility as standard for water vapour handling. The pump is fitted as standard with the same exhaust valve arrangement as the larger nXDS for system protection.
The mXDS3 is offered as standard. And there is the option to purchase the fully configured mXDS3s. This is supplied with an exhaust silencer/filter accessory and factory fitted with an integrated delay opening inlet valve for enhanced system protection in the event of power failure.
nXDS - Datos técnicos básicos
Capacidad de bombeo
Vacío no GB
Vacío con GB
Capacidad de bombeo de vapor de agua
Nivel de ruido
nXDS6i
6,2 m³/h
0.02 mbar
0.05 mbar
110 g/h
<52 dB(A)
nXDS10i
11,4 m³/h
0.007 mbar
0.007 mbar
145 g/h
<52 dB(A)
nXDS15i
15,1 m³/h
0.007 mbar
0.007 mbar
145 g/h
<52 dB(A)
nXDS20i
22,0 m³/h
0.03 mbar
0.03 mbar
220 g/h
<52 dB(A)