Active Strain Gauge
The Edwards Active Strain Gauge (ASG2) is a rugged, corrosion resistant diaphragm gauge which provides accurate, gas independent measurement from 2000 mbar to 1 mbar or 1000 mbar to 1 mbar. It can be used as a stand-alone transducer allowing OEMs and system builders to develop low cost, flexible solutions to their vacuum instrumentation needs. Alternatively, it can be connected to the TIC Instrument Controller where it can be combined with many other sensor types to provide a complete vacuum instrument solution.
Note: ASG adaptor cable supplied separately. This cable must be used with TIC, AGC, ADC & ADD.
Pressure range
Accuracy
Max power
Temperature range Operating
Temperature range Compensated
Flange
mbar
mbar
W
°C
°C
ASG2 - 1000
1000 to 1
+/- 0.2% scale
0.1
-40 to +80
-10 to +50
NW16 / 1/8 NPT
ASG2 - 2000
2000 to 1
+/- 0.2% scale
0.1
-40 to +80
-10 to +50
NW16 / 1/8 NPT
Spectroscopy magazine
which simplifies system design and saves valuable rack space
which runs from standard d.c. power supplies of +12 to +32 V and is tolerant to voltage fluctuations
Ability to resolve 1 mbar changes in system pressure even at pressures near atmospheric makes the gauge ideal for monitoring large slow-pumping systems
Accuracy of ±0.2 full scale and stability 0.1% full scale
rugged design where the material exposed to vacuum is stainless steel 316 & Hastelloy C276 and enclosure rating IP65
which is easy to interface with a computer or PLC
